Search the Community

NZXT è una società che realizza diversi prodotti per il mondo PC ed ha appena aggiunto al suo catalogo l'HUE, un controller LED che permetterà di personalizzare l'effetto luce dato dalle lampade LED RGB.

Hello, I present my project V8 by DjinnVale. Well I will not do any of OC on this computer, I focus only on what the MOD and what I do with just venting because I am and those who believe that with good ventilation, you can cool very well. The mod will be based on a automobile V8 engine, but I will not be based on an engine of some raplica especificom its not that I have in my head but with a somewhat peculiar, do not think any level, all I making progress. So get to work, and I hope you all like what you will see. Well the first thing is a polyurethane foam plates and purchased the ready-made, I will start by cutting and pasting with glue, a piece after another cut and paste until I obtain the form I'm looking forward to. Once I have everything more or less stuck only on the basis of hand sanding, I give the form that I need.[ATTACH=CONFIG]2134[/ATTACH][ATTACH=CONFIG]2135[/ATTACH][ATTACH=CONFIG]2136[/ATTACH][ATTACH=CONFIG]2137[/ATTACH][ATTACH=CONFIG]2138[/ATTACH][ATTACH=CONFIG]2139[/ATTACH][ATTACH=CONFIG]2140[/ATTACH] And once made ??the mold with the foam, starting to give a layer of release agent, for applying fiberglass, and to remove it without problems.

Mod & Roll 2012 - KOMPRESSOR MOD by Chentinox Hello, friends Xtremehardware, I see many people known and very good in the world of modding as Masbuscadomodding, Diegojavbu and Tortured Soul, greetings to them and those who do not know well. Here I leave my thread to post photos of my current job modding called KOMPRESSOR where I mix my two best hobbies, modding and overclocking. I will try to make a table-like mod bencheo. My work of the compressor of a refrigerator in which I will use to cool the water to cool the liquid rerigeracion CPU.Las first tests were a success, leaving the CPU temperature to -4 ° with car coolant mixed with water . I'll start with a strong foundation for the entire weight of the mod, a wooden tray DM. Then I will lay out the space available for the mod occupies the minimum space possible. To make this mod will use chassis metraquilato strips, cutting as an enclosure to make tough recubrire of green metraquilato then too. The union between pieces use proper screws M-5 because I do not trust much to glue the parts due to their weight, in addition to screw you always have the option to remove it if necessary. Once the envelope and check exterior mod pieces begin to assemble all staying with this. Now it is preparing the lighting, for which we will use a blue LED strips around the perimeter of the tray, then paint all the black tray to be giving a consistent appearance. Another very important part of a mod is pinura touches now time to prepare the pieces to paint, in this case, water pump, the compressor and the current transformer. Very important to give a coat of primer before putting paint color, we will improve the adhesion of the paint chipping and future. After preparing all the components of the mod, it will mount everything in place giving way to go. Tap the time to prepare all the electronics, the push button on and off lights, plate and compressor. Work although quite simple, a bit boring and welding wires ordination of them. Then post the neon red on the bottom and violet at the inner corners of the mod. With all this, my mod KOMPRESSOR will have this appearance. Now I will work on the top cover. I'll add some vents in the form of cylindrical nozzles. Tap the time of the mod's name engraved on the metraquilato KOMPRESSOR. In passing the name of the sponsors. Here are some pictures with the front cover removed. This is the time to test the mod KOMPRESSOR. I will use the graphics cards with both air and liquid nitrogen.

Hola le prento mi humilde Mod el viking mod: En el frente se le colocara una tapa sobre las bahias con motivo nordico respetando las curvas originales del gabo, se le haran grabados de runas retroiluminadas. se les movera de lugar los botones de encendido para dar lugar a una ventana con chapa mesh, y se colocara un baybus para regular 3 fanes hecho en casa ademas de unos interruptores para las luces. en el lateral izquierdo(visto el gabo de frente) se le calara la silueta de un busto de odin asi como 4 marcas auspiciantes y el anagrama de mi segundo nombre "olaf" el cual su origen ,nordico, es la razon de este mod, en el anagrama se colocara un cooler. los cooler laterales seran desplazados hacia las esquinas inferiores a los cuales se les agregara una grilla con moticos nordicos (silueta vikinga).tambien se le colocara una placa de acrilico. En el lateral derecho se hara un grabado de una embarcacion vikinga. Een la parte superior se le añade una plataforma para darle lugar a grabados de runas y la colocacion de uno o dos coolers(a definirse). La parte trasera no se tocara. En la base se le añadira unas patas y 2 cooles que ingresen aire fresco. se iluminara desde adentro Los colores seran negro rojo y azul. seguramente las runas tendran otro color pero eso iria cambiando a medida que se realize el mod. (Flujo estimado del aire) y la herramienta con la que me voy a ayudar para realizar el mod Los sponsors: les dejo un modelo de lo que quiero hacer e.e a la izquierda lo que se grabara en un acrilico a la derecha lo que se cortara en el lateral! ^^ superpuestos: lo que se va a calar sin las lineas de referencias: mientras lo hacia: Imagenes del lateral cortado: P/D: este fue mi primer corte con dremel e.e La base del Gabo marcada para el corte para 2 coolers de 80mm ampliacion e.e: Base cortada: P/D: las patitas se las coloque despues del corte para probar los coolers, llegando a la conclucion de que lo tengo que levantar por lo menos 3mm para que el flujo de aire sea optimo aca fotos con los coolers Plano con las medidas de la parte superior que se le va a añadir: la chapa marcada para doblar, eso lo hare en estos dias cuando valla a lo de mi abuelo que tiene una dobladora: aca el primer intento de esmerilar en el acrilico, usando un acrilico que tenia por ahi tirado y las medidas no me daban ademas de tener um par de aujeros jodidos jaja

Così abbiamo avviare la "SteamPlanet" progetto come ogni nuovo progetto deve iniziare a visualizzare il case e dopo smantellato. Per fortuna non faccio revisione, e che qualcuno sarebbe andato storto. Questo progetto si basa su steampunk. il nuovo piede, le manca la gomma, quindi si alza il case più 5mm. Presentazione dei ciminiere Per ora è tutto, a poco a poco ci saranno ulteriori progressi. Spero che tu capisca il mio italiano.

Hello .. This forum really good people:clapclap: Well ... I make a hole in my time and my worklog harmonized First rename Box King Tiger tiger box. The idea: During WWII the Germans developed some tanks greatly feared by the Allies. The panzer VI .. s called German Tigers. We talked about the number of tanks Tiger I and Tiger II (KingTigerII) Tiger I King Tiger II It is a classic tank that served as a model for the current tanks as leopart What I do is take ideas from these tanks and put them in a mod The chosen Well some time ago a good friend gave me a case that no longer served ... is a desktop type case, I think your brand is Siemens q. Bring a cap that covers the entire case This case came with an AT power and small size. HandCad 5D The first sketches of the idea that would result. Designed in HandCad 5D

Este mod sera realizado solo y únicamente con sobrantes de otros mods. marcado para corte, case genérico y muy viejo : a medio camino de conocer la pulidora Como se puede ver acá, la caja se recorto para que apenas entre la board: Lo que quedo con lo que sobro: Ahora el turno de la tapa: marcando la bisagra de piano para realizar perforaciones correspondientes: Ya fijadas Luego fijarla al case: Midiendo espacios, donde esta el fan sera la parte trasera del case: Cortando acrílico para la parte trasera: Más cortes para la parte trasera: Montaje para la rejilla del fan trasero: Y claro pintura: Se intento un digi camo pero me quedo horrible, así que lo cambiare: Y se instalo fan trasero, pintadito como debe ser: Funcionando: Montado sin cambiar camo aun: Corte y alistamiento de la base . . . pronto más avances, gracias por visitar el post

Hello and welcome this mod little different i am using a Thermaltake Commander as chassis this will be the front of car not the entire car using a V6 CPU fan kind look like a engine will add small turbo and custom air filter will be cover with a fiberglass will see how will come out thanks for watching

THE LITTLE OWL Little is just an understatement here as I will be using an XSPC H1 case. STORYLINE: Jakob (pronounced Yakob) commissioned me to build a kick **** machine BASED on the NEW NOCTUA NF-F12 (ones that are optimised for water cooling rads) fans. In addition he wanted me to base the case on Noctua collours, however some people do not like these, so one had to base this build around a slighty differing theme. If you look at the noctua website, the colours are much more 'red' than the fans themselves (which are brown based) IDEA EXPLAINED. Essentialy this is going to be part scratch build/part mod with a dark red and white themed case with the internals being polar white and typhoon red. The RED LASER TUNNEL effect will be used here Sponsors so far: Noctua (Ofcourse) LAMPTRON (ofCourse) MAYHEMS INNOVATION COOLING for the IC Diamond note: Remember the LASER PROJECT? This will be used in here. PAINT TO BE USED HYCOTE tornado RED HYCOTE POLAR WHITE HYCOTE GLOSS WHITE HYCOTE PRIMER HYCOTE CLEAR OVERCOAT Hycote Crystal Silver Hycote Pepper RED pEARLeSCENT hYCOTE tANGO RED mETALLIC Photo of a default XSPC H1 CASE Remember my last build where I used acrylic feet instead of the luggage-trolly-like castor wheels? well since the mounting of the castors are exactly the same as the Mountain Mods level, we can re-use that idea. Take one XSPC H1 Base plate carefully mark out where the fifth hole for the LED is to go. score a line from bottom left to the top right mounting hole and likewise for bottom right to top left. Now do the same for all four acrylic feet mounts Now here is where I had a problem, as I didnt have a centre punch available in order to create a pilot for the drill. So i thought of using an engraving tool that comes with my dremel set. Slowly but firmly press the dremel onto the desired spot This then allows a 2mm pilot hole with the dremel Now that is sorted lets use the big drill shall we? Press the drill trigger slowly as to drill gently through the delicate aluminium (DO NOT USE HAMMER ACTION) This then creates a nice 5mm hole for the LED to shine into the acrylic feet. TESTING THE FIT Note the LED has just enough room to fit whilst leaving the 5mm room to have a grip within the hole. watch out for the next part:D

Synopsis: [anno domini 2099] After the infiltration of the radicals known as Hands of the Gods [HOTG] led by masbuskado and the Bio-Warfare project, the Opprezzors have decided to create a Squad to slave and annihilate the remaining humans. The battle for survival begins now. Description: This is an original masbuskado's design, base on the HOTG: 2099 Story created by masbuskado, Opprezzors: Annihilation Squad is the Third project of the SAGA, it's the second Social Work Log from masbuskado @ New Mod City. About the Project: it will be an original scratch build, some industrial machine involved, 70+ hours of 2D / 3D design and modeling in CorelDraw X15 and SolidWorks 2011. Some parts are going to be cut with a press brake and some with laser. [The Sketch] It was stolen from masbuskado's files during the great battle of 2037. The Opprezzors begin their research about using masbuskado's machine against the HOTG group... Due to the unlimited technological resource of the Opprezzors the files were decrypted; they found some of the first 3D Renders of the project. [OPP-X9342 NET2/masbuskado/peacemaker/filez] [Loading Files] [Please wait] [100% Completed] [OPP-X9342 NET2/masbuskado/peacemaker/filez] [Loading More Files] [Please wait] [97% Completed] Follow this project on FB /opprezzors.A.Squad to get Live Updates!

salve sono nuovo e questo e il mio primo mod mi presento a voi con un bel mod il mio primo mod di un vecchio case di un pc i lavori sono gia iniziati ma domani vi postero cmq le foto non preoccupatevi

Hola a todos y gracias por la oportunidad de apuntarme a este concurso, perdonad que no escriba en Italiano, pero es que no tenemos mucha costumbre en españa, XD. Quiero presentaros mi proyecto. Artefacto Dwemer. Sera una caja construida desde cero, a medida y espero que bonita, contara con un sistema de refrigeracion especial, mixto agua y cambio de fase, con un compresor de 700 watios de frio a -30º celsius, con R-404, y la posibilidad de elegir entre ellos para un uso normal, refrigeracion liquida, o O.C. extremo, por cambio de fase a temperaturas de hasta -40º. De momento, cuanto con mi "viejo" pc, al que he empezado a desmontar, os cuento: Asus Rampage III formula, socket 1366. I7 930 12 Gb kingston 1333 Cooler Master 850W WD caviar green 1 Tb Ssd Cruzial M4 64 Gb Targeta Grafica: No definida. El desmontage del PC. Proximo dia, mas.

Signori qui comincia una nuova avventura " The green water of class " osservate attentamente gli sviluppi a venire, solo pochi sanno e si contano in men di una mano, di certo vi stupiro' e posso garantirvelo, tutti gli elementi impiegati saranno di altissimo livello . Auguro a tutti voi una splendida avventura immersi nel verde............ ermanno aka corsaronero333

Apro questo thread per raccogliere tutti i Ghetto Mod possibili ed immaginabili. Cosa è un Ghetto Mod qualcuno si chiederà, bene un Ghetto Mod è un mod artigianale che può inglobare qualsiasi uso che se ne faccia di componenti per pc o non. Ora vediamo se anche voi siete dei Ghetto Modder Possibilmente si accettanno mod Ghetto personali , ma non si disdegnano quelli presi dalla rete anche se possibilmente mantenerli in un certo limite Ora dateci sotto

Ecco un interessante progetto di Modding denominato Dragon PC che riprende in tutto e per tutto il significato e il termine usato per il Modding. A seguire le immagini del worklog e il risultato finale.

Hi , this is my first time in this community , I´m glad to be here I will join the contest (just for fun) I'm a modding fan and I will present my project Hi-Tek armoured case The project is already participating in another tourneament in Aegentina (where I live) , I hope you like it. Is a Thematic mod , inspired in games like Crysis 2 and MGS 4 , the main idea is to develop a computer armoured with the technology of nannosuite 2 and Snake armoursuite

Ciao a tutti........ complimenti per il forum e tutto il sito che devo dire e veramente interessante e piacevole da visitare ,per questo ho scelto di postare qui il mio lavoro e spero che cio vi possa fare piacere. Premetto con lo scrivere che il lavoro e stato cominciato tempo fa,ma non e mai stato portato a termine definitivamente, per vari motivi sono stato impossibilitato a continuare ; scritto cio non ho potuto fare a meno di vedere il vostro contest Mod‘n Roll che e veramente ben fatto ,e mi e venuta la voglia di ripartire da zero e portare al termine il tutto tenendovi sempre aggiornati con foto e tutto il resto spero possa essere di vostro gradimento . a dimenticavo in bocca a lupo per il contest e comunque vada e stato bello partecipare ? --------------------------------------------------------------------------------------------------------------------------------- Ciao per iniziare beccatevi Questo : a breve le foto finali questo e solo un assagino ,mancano ancora dei piccoli dettagli .....che sarnno una sorpresa :2guns: :armati48::sfida:

Hi guys, here I am. PROJECT : to create the first working prototype of a Cooler Master HAF 932 and Silverstone Raven mix, with Silverstone TJ09 elements KEY FEATURES : - Sliding vertical motherboard tray - Silverstone 90 degrees rotated motherboard plate - Stack Effect - Hot-Swap HDD trays, possibly silenced with a passive heatsink mainframe - Air cooling beast, trying to achieve the best Passive design for the CPU - Air duct to cool a single, but very powerful, PASSIVE VGA card - Red/White advanced Led System, integrating a sound-activated mode (1) . I'm also thinking of integrating a system like this (2), but i'll need to think of it, to -arrange the lights and the decals - Nuclear Bomb/Radiation/Space/Egyptian Decals - Modded HellFire GTX 480 :perfido: 1 2 About Project Orion : http://en.wikipedia.org/wiki/Project_Orion_(nuclear_propulsion) More to come, but it will take a lot of time since now, because of it's just concept and because of right now I've got a lot of time-consuming things to do. Photo session while brainstorming, kindly permitted by One1ros Photobook Stay tuned. Nikolaj

Salve gente sono qui a proporvi questo mod per cause relative a neve e altri impegni personali aime dovrò iniziare a moddare quel che posso con quello che trovo in giro per casa. Prometto che a fine topic ci sarà un case auto costruito e le varie periferiche. Per prima cosa quest anno mi sono organizzato e attrezzato meglio, ora ecco a voi l inizio del mod che riguarda la tastiera Dremel 4000 nuovo arrivato Primo piano dremel Primo piano sportellino cassetta dremel

Ma veniamo ai lavori, ho cominciato ad installare per prima cosa una dei due aquacomputer aquatube e i due termometri digitali che collegherò ai radiatori e ad una delle due vaschette, ho inoltre montato uno dei radiatori ,che come è possibile notare occupa un bel pò di spazio, nella parte inferiore del case; questo può rivelarsi un problema dal momento chenon potrei installae un secondo radiatore dello stesso modello senza modificare la struttura (esatto per chi lo sta pensando ce lo farò entrare lo stesso:briai:) Nei prossimi giorni finirò di montare il secondo reservoir e la griglia aquacomputer per un ipotetico terzo 3x140O0

Salve a tutti e benvenuti nel mio worklog Qualcuno di voi ha già potuto seguire il mio primo modding decente su italiamodding e vedo che anch'io qui conosco molti dei partecipanti. Il mio mod si ispira alla chimica,ad un famoso monumento ed al materiale che probabilmente è uno dei più importanti nel campo delle tecnologie: il silicio. Ed ecco un disegno fatto alla meglio per darvi un'idea generale di ciò che dovrò realizzare:

Hi guys. I decided to enter my latest worklog in here, I hope that's okay. The first couple of posts are going to be quite large as I have copied them from my current worklog. From now on, I will ofcourse post in here with every new update. I you have any questions please ask. Just be aware that my Italian is really bad. I gave my girlfriend a pc a couple of months ago, and to be honest the case might be the ugliest one I've ever seen! :lol: The specs are not insane, but it works. Foxconn P35AX Intel E8500 4GB Kingston Hyperx Nvidia 9600GT Etc. Since she's a WOW/RIFT player (I know :worried:) and used to play on a laptop ment for schoolwork, this is a big step up! I havn't gotten the case yet, but waiting for it. I'm getting a couple of little things for the article I wrote for Custom PC Magazine, and amongst those I'm getting a Fractal Design Refine R3. This will be used for this mod. I have no idea of the color of it, but I know what I'm hoping for! *cough* white *cough* It's not going to be an insane mod, just a couple of little things here and there. I havn't worked out all the small querks out yet, but the idea is as follows: Custom watercooling. (I'm guessing that's kind of required on my part by now) :lol: Custom CPU block. (started that) Custom Reservoir. (This is going to require some heatbending in the oven again) Custom pump housing. 1 x 120mm radidator for the CPU. I don't know what to do about the NB and SB for now. She's using the pc, and she knows I'm going to do something to it, but has no idea what! Since she's in school and crazy about math and physics, I'm going with the theme of "The Theory of Everything". I'm going to paint decals of equations from Quantum Physics, String Theory etc. on it. ( Afaik String Theory is not combineable with The Theory of Everything as such, but they have some cool equations so leave me alone! :lol: ) Since my own pc needs a graphic upgrade soon, I'm going to put 1 or 2 9800gtx+ gfx cards in there. I'm gonna go out on a limb and say I'm going to keep the waterblocks on the gfx(s). Now, the cool part about this mod is going to be the DVD drive. I'm going to keep it a secret untill I get the whole thing worked out, but I'm going to drop a lot of hints for it! First I needed an old dvd drive. Cut out the pieces I need: Sprocket didn't fit with my plans: I need this to be lined up as well as possible, so thin plastic is not going to cut it. Measured up the housing and made it in aluminum: Mounted the sprockets. Seems I still know how a caliper works, all the measurements fits perfectly! : Pushed the end piece onto it, just for a look: This is where I am now. I would love to get this done by X-mas, so let's see how things work out. I need some help from guys at work with the electronic side of this, as I have no idea of what I'm doing. I know how to blow a fuse in my appartment by putting my hands in the PSU, and that's about it! :lol: I also ordered a Passive InfraRed sensor, that should arrive in a couple of weeks. Hope it will work with my plan. I hope you will be patient as this is going to take some time! So, on with the show! We've been pinned down with work the last couple of weeks. Between working 12-13 hour days a couple of times, and getting my mods ready for the BEEP 2011 show, I havn't had time to work on this little baby. But that's all done, and I'm ready! So I stayed a bit after work yesterday, and got there early this morning as well! This: ...was put in the mill: The channel is then done, and the groove for the O-ring is milled. Check. While the mill was taking care of itself, I made a small aluminum part that goes in the CPU block: Cut and turned: And what I see as the most important part was the next thing! When milling was done I got a fast look at the pattern through the coolant, and I actually froze for a second as I thought It had milled the parts that was supposed to stay in there! :lol: No worries, It came out as I had hoped for! :thumb: That's it for now! I hope I have made you wonder even more about the finishing result of this! :lol: Oh... I almost forgot! I also received a small package containing a PIR sensor... Time will show what that is for! Right now I'm just waiting for the parts from Custom PC Magazine, but I'm not worried that I have nothing to do atm! :lol:

Ciao a tutti i modders e non!! Ho in mente l'idea di creare un pc un pò fuori dalle righe con hard disk e masterizzatori in obliquo, un portatile dentro un pc, e ---... ma non posso svelarvi tutto sarà una sorpresa in piccole pillole... Presto pubblicherò le foto con l'inizio dei lavori...

MESH MOD: è un concetto di arte urbana con materiali riciclati da una discarica, la stragrande maggioranza siano espressi dalla mesh (materiale che prende il nome) Mesh Mod Finish!

LIAN-LI Pitstop T 60 Eccoci qui pronti per l'ennesima avventura, ebbene prendero' in esame un bel banchetto della Lian-Li . Allacciare le cinture non fumare preparare i popcorn al seguito birra e.......... buona visione a tutti Ermanno Cominciamo con il postare la materia prima, il case