Jump to content

OVERCLOCK CPU i7-4960X CON MB ASUS RAMPAGE IV BLACK EDITION


simplu

Recommended Posts

Ciao Ragazzi,

ho questo bestione per gaming e vorrei overclockarlo un pò:

- MB SKT 2011 ASUS RAMPAGE IV BLACK EDITION

- CPU Intel Core i7-4960X BOX 3,60GHz S.2011 12MB 6 Kerne retail

- KIT MEMORIA 32GB (4X8GB) DDR3 CORSAIR DOMINATOR PLATINUM QUAD CHANNEL (memorie 1,65V a 2400MHz da Corsair serie Dominator Platinum con timings CL 10-12-12-31)

 

mi piacerebbe portare la cpu almeno a 4,5ghz e la ram a 2400mhz.

 

si potrebbe fare ?

se è fattibile un buon overclock farei anche un custom water cooling come da foto allegata.

grazie anticipatamente.

Link to comment
Share on other sites



Figurati, poi dipende sempre dalla bontà della.CPU e dal voltaggio/temperatura che hai, x esempio fai di multi 46 con volt. 1.35 e vedi se sei stabile, poi vai a scendere.si volt. 1.34 cosi sino ad arrivare al punto che.non.sei + stabile ed avrai trovato il binomio perfetto :).

Scrivi su un foglietto le.varie frequenze e voltaggio e temperature sotto sforzo e vai avanti, ci vuole un po di tempo x farlo ma ne vale la pena, scaricati i prog. Realtemp x le.temperature e x la stabilità intelburnstest o linx o occt

 

Inviato dal mio Che2-L11 utilizzando Tapatalk

Link to comment
Share on other sites

Dipende da te, con gli stati c attivi avrai l'oc x esempio a 4.6 solo quando è sotto sforzo e x.il resto del tempo scendera ed avrà i meno calore e consumo e la CPU durerà di +, disattivando gli stati c avrai la CPU sempre a potetenza.piena con + calore e consumi, poi alza la cache a 4.2 4.4 o anche di + se ti va è sempre soggettiva alla bontà della CPU x avere + larghezza di banda dalle ram che potrà i vedere dai numeri da linx o Intel burns test

 

Inviato dal mio Che2-L11 utilizzando Tapatalk

Link to comment
Share on other sites

  • 2 weeks later...

Con questi parametri sono riuscito a fare un test con Intelburntest ed è riuscito a stare stabile 49.000 secondi (sono circa 14 ore).

Però se faccio un tentativo di stress hardware con AIDA mi da già errore e si blocca il test.

Secondo voi dovrei toccare qualcosa per migliorare ? oppure lascio cosi ?

 

Extreme Tweaker

Ai Overclock Tuner …………………………………………………….. XMP

CPU Level Up ………………………………………………………………. Disabled

BCLK Frequency ………………………………………………………….. 100

CPU Strap ……………………………………………………………..……. 100

ClockGen Full Reset ……………………………………………………. Enabled

CPU Core Ratio …………………………………………………………… Synced All Cores

1-Core Ratio Limit ………………………………………………………. 45

2-Core Ratio Limit ………………………………………………………. 45

3-Core Ratio Limit ………………………………………………………. 45

4-Core Ratio Limit ………………………………………………………. 45

5-Core Ratio Limit ………………………………………………………. 45

6-Core Ratio Limit ………………………………………………………. 45

Internal PLL Overvoltage …………………………….........……. Auto

DRAM Frequency ……………………………………………….……….. 2400 MHz

Xtreme Tweaking …………………………………………………….…. Disabled

EPU Power Saving Mode ……………………………………….……. Disabled

Extreme OV ………………………………………………………….….…. Disabled

BCLK Skew …………………………………………………………….……. Auto

CPU VCORE Voltage ………………………………………..……….…. Manual Mode

CPU VCORE Manual Voltage……….…………………………..…… 1.350

VTT CPU Voltage …....………………………..…….............….. 1.100

2nd VTTCPU Voltage ………………………..……............….…. Auto

CPU VCCSA Voltage ……………………………..................... Manual

CPU VCCSA Manual Voltage ……………..…..…................ 1.150

DRAM Voltage (CHA, CHB) …………………….................… 1.650

DRAM Voltage (CHC, CHD) ……………………….............…. 1.650

CPU PLL Voltage …….……………........................……..…. Auto

PCH 1.1v Voltage ………………………………………............... Auto

Initial PLL Termination Voltage …………………............... Auto

Eventual PLL Termination Voltage ………….................. Auto

VTTDDR Voltage (CHA, CHB) ………………….................. Auto

VTTDDR Voltage (CHC, CHD) ……………………………….…... Auto

CPU PLL Termination …………………………………............... Auto

CPU Spread Spectrum ………………………….............……… Disabled

PCIE Spread Spectrum ……………………………................. Disabled

BCLK Recovery ……………………………………………..…………... Enabled

DIGI+ Power Control

CPU VCORE

CPU Load-Line Calibration ……………………...........……….. Auto

CPU Current Capability .…………………….............…………. Auto

CPU Voltage Frequency ….…………………………...........…… Auto

VRM Over Temperature Protection ………………………….…. Auto

CPU Power Duty Control …………………………………………….. T.Probe

Vcore MOS volt. Control …..……………………….........…….. Auto

CPU Power Phase Control …...............................…… Auto

CPU Spread Spectrum ………………………................……… Disabled

Current Inrush Inertia …………………………………………………. Auto

CPU VCORE Boot Up Voltage ………………………………………. Auto

CPU VSA

VCCSA Load-Line Calibration ………………………………………. Auto

VCCSA Current Capability ……………………………………………. 100%

VCCSA Fixed Frequency ………………………………………………. 300

CPU VCCSA Boot Up Voltage ………………………………………. Auto

CPU VTT

CPU VTT Switching Freq ……………………………………………… Auto

CPU VTT Over-Curr entProtection ………………………………. Auto

DRAM Voltage

DRAM-AB Current Capability ………………………………………. 100%

DRAM-AB Voltage Frequency ..……………………………………. Auto

DRAM-AB Phase Control …….……………………………….………. Standard

DRAM-CD Current Capability ………………………………………. 100%

DRAM-CD Voltage Frequency ..……………………………………. Auto

DRAM-CD Phase Control …….……………………………….………. Standard

PCH 1.1V Switching Freq ……………………………………………… Auto

 

Advanced:

Internal Adaptive Thermal Monitor............................ Disabled

Hyper-threading .................................................. .. Enabled

Limit CPUID Maximum ........................................... Disabled

Execute Disable Bit ................................................ Disabled

Intel Virtualization Technology ................................. Disabled

CPU POWER MANAGEMENT CONFIGURATION:

Enhanced Intel SpeedStep Technology ....................... Disabled

Turbo Mode .................................................. ......... Enable

CPU C states .................................................. ....... Disabled

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...